TM 5-2350-262-10
Change 6 F-3
KEY
LUBRICANTS
CAPACITIES
EXPECTEDTEMPERATURES
32F°andabove
(0° C and above)
0° to +65°F
(-18° C to -54°C )
-10° to +40°F
(123° C to 4°C )
OE/HDO
(MIL-L-2104)
OE/HDO
(MIL-L-46167)
GO
(MIL-L-2105)
LUBRICATING OIL,
Internal combustion
Engine Tactical Service
LUBRICATING OIL,
Internal combustion
Engine Tactical Service
Engine crankcase, *
add 4 additional quarts
(3.8 L) for filters
Winch 25,000 Lb
(11,350 Kg)
35,000 Lb
(15,890 Kg)
Transmision, Steer
Unit, Transfer Case,
Oil Cooler and Lines
Hydraulic Tank
Hydraulioc Tank Return
line filter
LUBRICATING OIL,
Gear, Multi-purpose
GREASE, Automotive
and Artillery
Roadwheel
Hub Bearing
LUBRICATING OIL,
General Purpose
Oil Can Points
Final Drives (2)
Molyodenum
Disulfide
Hatch Hinge Assembly
Prop Shaft
GAA
(MIL-G-10924)
GMD
(MIL-G-21164)
PL
(Medium
MIL-L-3150)
(Special
W-L-800)
Refill 22 qts (20.8 L)
Dry 30 qts (28.4 L)
3.5 qts (3.3 L)
4.0 qts (3.8 L)
Refill 50 qts (47.3 L)
Dry 78 qts (73.8 L)
Refill 108 qts (102.2 L)
Dry 128 qts (121.1 L)
4 qts (3.8 L)
2 qal. each (7.6 L)
OE/HDO-30
OE/HDO-10
CEA
CEA
OE/HDO-30
OE/HDO-10
GO-80/90
GAA
GMD
PL-M
Medium
PL-S
Special
PL-S
Special
GENERAL NOTE 2 The use of OE/HDO 15W-40 in lieu of OE/HDO-30 is authorized. The
HDO 15W-40 can be used at all temperatures above +5°F (-15°C)
for all components except the transmission, transfer case, steer
unit, and final drives.
GENERAL NOTE 1 If AOE lubricant is required to meet the temperature rangespecified in key,
OEA is to be used in all places where OE/HDO-10 is specified.
* Oil will not be changed unless recommended by the AOAP Laboratory.
(DA PAM 738-750-Chap. 4, Para. 4-1a)
