TM 5-2350-262-10
2-62 Change 5
PALLETIZED CARGO HANDLING - CONTINUED
LOADING PALLET - CONTINUED
7
Push both suspension control levers (1)
forward, and lower front of vehicle until
scraper
cutting
edge
(2)
rests
on
ground.
8
Attach chain (3) to pallet and to lifting eye
(4) on ejector (5).
WARNING
Do not operate ejector when personnel
are in bowl. Do not work in bowl unless
ejector lock is engaged. Failure to comply
may result in severe injury to personnel.
9
Slowly retract ejector (5) until pallet is
pulled
into
bowl.
If
necessary,
move
ejector (5) forward, shorten chain (3), and
pull pallet all the way into bowl.
10
Disconnect chain (3) from ejector (5). Have
helper remove two apron lockpins (6), then
raise front of vehicle and lower apron (7).
Place suspension in SPRUNG mode.
11
Stow chain (3) on apron (7).
