TM 9-2350-222-20-1-4
RIGHT TAILLIGHT - STOPLIGHT ASSEMBLY REPLACEMENT (Sheet 1 of 3)
TOOLS: 9/16 in. combination box and open end wrench
SUPPLIES: Silicone compound (Item 32, Appendix D)
Masking tape (Item 57, Appendix D)
Pencil
Lockwasher (MS35338-46) (2 required)
Remove transmission shroud (page 9-19)
PRELIMINARY
\
CONNECTIONS FOR RIGHT
TAILLIGHT-STOPLIGHT ASSEMBLY
REMOVAL:
NOTE
Inspect leads (A) and leads (B) for
numbered tags (C) 23 and 24. If
l e a d s do not have tags, use
masking tape (Item 57, Appendix
D) and pencil to number leads.
1
Reach through exhaust door opening and
disconnect two leads (A) from hull connectors
(B).
2.
Slide two connector shells (D) back on taillight
leads to expose two slotted washers (E).
NOTE
Lubricant may be needed on leads
(A) to remove shells (D).
3.
Remove two slotted washers (E) and two shells
(D).
GO on to Sheet 2
TA139778
10-223