TM 9-2350-222-20-1-4
DOMELIGHT RESISTOR ASSEMBLY REPLACEMENT (Sheet 2 of 2)
INSTALLATION:
Position resistor assembly (A) in domelight resistor assembly bracket (B).
1.
Place new lockwasher (C) and nut (D) on
2.
resistor assembly (A).
Using wrench on nut (D) and Pliers On
3.
resistor assembly (A), tighten nut (D).
4.
Open clamp (E) enough to insert wires of
resistor assembly (A).
Place new lockwasher (F), flat washer (G), and
5.
clamp (E) on screw (H).
Using socket, tighten screw (H).
6.
Slide knob (J) on resistor assembly (A).
7.
Using allen wrench, tighten two setscrews (K)
8.
Connect electrical connectors (L) and (M).
9.
10. Perform function test (TM 9-2350-222-10).
End of Task
TA139769
10-214