TM 9-2350-222-34-1
BULKHEAD-WALL-TO-MANIFOLD TUBE ASSEMBLY REPLACEMENT (FIXED FIRE
EXTINGUISHER) (Sheet 2 of 2)
INSTALLATION:
1. Position tube assembly (A) in vehicle and hand tighten connector (B) to adapter (C) and connector (D) to bulkhead
elbow (E).
2. Using 1/2 inch wrench, tighten two screws (F) holding manifold (G) to brackets (H).
3. Using 1-1/4 inch wrench, tighten connector (D) to bulkhead elbow (E). Using torque wrench and 1-1/4 inch crowfoot,
tighten connector (D) to 40-55 lb-ft (54-75 N.m).
4. Using 1-1/4 inch wrench, tighten connector
(B) to adapter (C). Using torque wrench and
1-1/4 inch crowfoot, tighten connector (B) to
40-55 lb-ft (54-75 N.m).
5. Install center and left sub-floor access plates
(TM 9-2350-222-20).
7. Install turret (TM 9-2350-222-34-1).
End of Task
TA252657
Change 1 13-3