TM 9-2350-222-34-1
HYDRAULIC RESERVOIR REPLACEMENT (Sheet 15 of 15)
66.
Position clamp (CH) on cable (CJ).
67.
Using 7/16 inch socket, install screw and
lockwasher (CK).
68.
Position clamp (CL) on hose (CM).
69.
Using 7/16 inch socket, install screw and
70.
Position four retaining straps (CP) on each pair
of tube assemblies (one in front and one behind
tubes).
71.
Using 9/16 inch socket, install screw and
lockwasher (CQ) through two retaining straps
(CP).
72.
Install first shot fire extinguisher cylinder (TM 9-
2350-222-20-1).
73.
Install turret (TM 9-2350-222-34-2).
74.
Install driver's seat assembly (TM 9-2350-222-
20-1).
75.
Fill and purge reservoir and hydraulic system
and check for leaks (LO 9-2350-222-12).
End of Task
TA130841
12-16