HYDRAULIC RESERVOIR REPLACEMENT (Sheet 14 of 15)
Connect four tube assembly nuts (BV, BW, BX,
and BY) to control valve (AP).
Using 1-1/2 inch wrench, tighten four tube
assembly nuts (BV, BWBX, and BY).
Put lockwasher (BZ) on two screws (CA).
Position handle (CB) on control valve (AP) and,
using 9/16 inch socket, install two screws (CA).
Position clamp (CC) on hose (CD).
Using 7/16 inch socket, install screw and
Position bracket (CF) with attached parts and,
using 7/16 inch socket, install two screws and
Go on to Sheet 15