TM 9-2350-222-34-1
REAR STEERING CONTROL ROD REPLACEMENT (Sheet 3 of 3)
7. Adjust rod end (F) on rod (A) so rod end will aline to link.
8. Screw bolt (G) into link and rod end (F) connection.
9. Using 9/16 inch socket and torque wrench, tighten bolt (G) to 15-20 lb-ft (20-27 N m).
10. Using crowfoot and torque wrenches, tighten jamnut (E) up to rod end (F) to 15 20 lb-t (20-27 N m).
11. Install outer riser link shield at rear of vehicle (TM 9-2350-222-20-1).
End of Task
TA252654
Change 1 10-18