TM 9-2350-222-34-1
STEERING CONTROL SLEEVE ASSEMBLY REPLACEMENT (Sheet 1 of 2)
TOOLS:
7/16 in. combination box and open end wrench
9/16 in. combination box and open end wrench (2 required)
Torque wrench with 1/2 in. drive (0-175 lb-ft) (0-237 Nm)
7/16 in. crowfoot wrench with 1/2 in. drive
9/16 in. crowfoot wrench with 1/2 in. drive
9/16 in. socket with 3/8 in. drive
Flat-tip screwdriver
REFERENCE:
TM 9-2350-222-20-1
REMOVAL:
1. Using 9/16 inch wrench, remove screw (A) securing front intermediate rod (B) to bulkhead shaft rod end (C).
2. Using one 9/16 inch wrench to hold nut (D), use other 9/16 inch wrench to remove rod end (C).
Go on to Sheet 2
TA252643
Change 1 10-3