BRAKE SLAVE CYLINDER REPAIR (Sheet 3 of 6}
8. Insert screwdriver through hole in cylinder
(A) at point (N), push piston (P) and related
parts from slave cylinder (A). Throw away
piston (P) and related parts.
CLEANING AND INSPECTION:
Dry cleaning solvent P-D680 is toxic and flammable. To avoid injury, wear protective goggles and
gloves and use in a well ventilated area. Avoid contact with skin, eyes, and clothes, and do not
breathe vapors. Do not use near open fire or excessive heat. The flash point for Type I dry
cleaning solvent is 100' F (38' C) and for Type II is 140" F (60 C). If you become dizzy while using
dry cleaning solvent, get fresh air immediately and get medical aid. If contact with eyes is made,
wash your eyes with water and get medical aid immediately.
Remove slave cylinder from vise. Clean slave cylinder and parts not discarded, using dry cleaning solvent and
Visually inspect cylinder hole for scratches. Replace slave cylinder if unserviceable.
Go on to Sheet 4
Change 5 8-17