MASTER CYLINDER-TO-BULKHEAD TUBE ASSEMBLY REPLACEMENT (Sheet 4 of 4)
Using wrench, install tube nut (D) to master cylinder reducer (E).
Remove drip pan or rags from under tube nut (D) at master cylinder (F).
Using socket, install three screws, washers, and loop clamps (G) holding tubing to hull wall.
Fill and bleed hydraulic system (TM 9-2350-222-20-1).
Install personnel heater hose (TM 9-2350-222-20-1).
Install left front ammo rack (TM 9-2350-222-20-1).
Unblock vehicle tracks (TM 9-2350-222-10).
End of Task