TM 9-2350-222-34-1
TRANSMISSION REPLACEMENT (Sheet 21 of 24)
52. Position gasket (BD) and exhaust pipe (BE) onto
NOTE
turbocharger (BF) and, using 1/2 inch socket,
The procedure described in step 52
install six nuts (BG) securing exhaust pipe to
applies to the right and left side of
turbocharger (BF).
transmission.
NOTE
Some engine breather tubes are
secured to exhaust by two 1/2 inch
54. Using adjustable wrench, install elbow (BL) onto
hex head screws.
transmission.
55. Position transmission vent line (BM) to
53. Install clamps (BH) onto engine breather tube
transmission and, using 7/8 inch wrench, install
(BJ) and position tube (BJ) onto mounts (BK).
nut (BN) to elbow (BL).
Using screwdriver, tighten clamps (BH) securing
tube (BJ) to mounts (BK).
Go on to Sheet 21.1
TA248764
Change 2 6-42