TM 9-2350-222-34-1
TRANSMISSION REPLACEMENT (Sheet 10 of 24)
57.
Using 1-1/8 inch socket, remove input shaft plug
(BU) and gasket (BV) from transmission.
58.
Using snap ring pliers, remove retaining ring (BW)
at rear of input shaft (BX).
59.
Using puller attachment and mechanical puller
adapter, draw input shaft (BX) rearward until
disengaged from engine drive connection.
61.
Attach transmission sling to transmission. Take up
slack, but do not lift transmission.
62.
Place a pan under engine and transmission at
separation point to catch oil.
60.
Remove engine fuel return tube assembly (TM 9-
2350-222-20-1).
Go on to Sheet 11
Change 3 6-31