TM 9-2350-222-34-1
TRANSMISSION REPLACEMENT (Sheet 6 of 24)
28. Using 1-5/8 inch wrench to hold adapter (AT), use
1-1/2 inch wrench and remove two tubes (AU) from
adapters (AT) on right side of transmission.
29. Using 1-5/8 inch wrench, remove two adapters (AT)
and washers (AV) from adapter (AW).
30. Using procedures described in steps 28 and 29, remove two tubes (AU), adapters (AT), and washers (AV) from
adapter (AW) on left side of transmission.
NOTE
It may be necessary to tap adapter (AW) with hammer to loosen.
31. On right side of transmission, using 9/16 inch socket, remove four nuts (AX). Remove adapter (AW) and gasket
(AW.1) from transmission.
32. On left side of transmission, using 9/16 inch socket, remove six nuts (AX). Remove adapter (AW) and gasket (AW.1)
from transmission..
Go on to Sheet 7
TA252639
Change 1 6-27