STARTER RELAY CABLE ASSEMBLY REPLACEMENT (Sheet 2 of 6)
It will be necessary to manually traverse
the turret to gain access to cable clamps.
3. Raise turret platform access door (B) to gain
access to cable clamps (TM 9-2350-222-10).
4. Using socket, remove two screws (C) and two
washers (D) from two clamps (E).
Strap type clamps should remain in po-
sition by removing only one screw from
strap. If replacing, remove both screws.
5. Using socket, remove two screws (F) from two
Go on to Sheet 3