SLAVE RECEPTACLE AND RELAY LEAD HARNESS ASSEMBLY REPLACEMENT (LATE MODEL)
(Sheet 6 of 7)
6. Connect connector (H) to master relay (J). Using pliers, tighten connector.
7. Connect connector (K) to bulkhead connector (L). Using spanner wrench, tighten connector (K).
8. Install five washers (M) and screws (N) into one end of straps (P). Using 7/16 inch socket, tighten screws.
9. Install three straps (Q), washer (R), and screws (S). Using 7/16 inch socket, tighten screws.
Go on to Sheet 7
Change 1 5-48.7