SLAVE RECEPTACLE AND RELAY LEAD HARNESS ASSEMBLY REPLACEMENT (LATE MODEL)
(Sheet 3 of 7)
Using spanner wrench, disconnect lower connector (M) from bulkhead connector (N).
Using 7/16 inch socket, remove three screws (P) and washers (Q) securing one end of straps (R).
Using pliers, disconnect connector (S) from master relay (T).
10. Using 7/16 inch socket, remove five screws (U) and washers (V) to release one end of straps (W).
11. Remove harness assembly from hull.
Go on to Sheet 4
Change 1 5-48.4