TM 9-2350-222-34-1
HEATER CONTROL WIRING HARNESS ASSEMBLY REPLACEMENT (Sheet 5 of 5)
8. Place clamp (P) in position. Using 7/16 inch wrench, install screw (Q).
9. Place clamp (R) in position. Using 7/16 inch wrench, install screw (S).
10. Place four clamps (T) in position. Using 7/16 inch wrench, install four screws (U).
11. Place strap (V) in position. Using 7/16 inch wrench, install two screws (W).
12. Place strap (X) in position. Using 7/16 inch wrench, install two screws (Y).
13. Place two clamps (Z) in position. Using 7/16 inch wrench, install screw (AA) and lockwasher (AB).
14. Install personnel heater (TM 9-2350-222-20-1).
15. Using pliers, connect connector (AD) to personnel heater (AC).
16. Connect three battery ground straps (TM 9-2350-222-20-1).
17. Perform functional check of personnel heater (TM 9-2350-222-10).
End of Task
TA130620
5-41