TM 9-2350-222-34-1
HULL POWER WIRING HARNESS ASSEMBLY REPLACEMENT (Sheet 7 of 14)
20. Using hands, disconnect intermediate bilge pump
connector (AS).
21. Using hands, disconnect air cleaner motor relay
connector (AT).
22. Using spanner wrench, disconnect connector (AU)
from enclosure assembly (AV).
23. Slide boot off center battery terminal.
24. Using 1/2 inch and 9/16 inch wrenches, disconnect
small lead (CKT 400,459, 975) from center battery
(AW).
25. Remove hull power wiring harness assembly from
vehicle.
Go on to Sheet 8
TA130608
5-29