FUEL TANK (LEFT) REPLACEMENT (Sheet 11 of 16)
15. Using 15/16 inch wrench, install washer (D) and
nut (E) to front mount (F). Tighten three nuts
16. Using 15/16 inch wrench, adjust front mount (F)
until 1/2 inch clearance is obtained between fuel
tank (C) and bulkhead (H).
17. Using 1/2 inch wrench, install lower front mount
(J) to hull floor using two screws and washers
Using two 15/16 inch wrenches, tighten
screw (L) and nut (M).
Go on to Sheet 12