FUEL TANKS (LEFT AND RIGHT) UPPER FRONT MOUNT REPLACEMENT (Sheet 2 of 6)
3. Using 15/16 inch wrench to hold screw and 15/ 16
inch socket to loosen nut (E), remove nut (E) and
4. Pull screw (F) out of bracket (G).
5. Remove two washers (H), two rubber mounts (J),
and eye bolt (C) from bracket (G).
6. Using pliers, cut Lockwire (K) from eight screws (L).
7. Using 1/2 inch socket, remove eight screws (L) and
8. Remove bracket (G).
Go on to Sheet 3