17. Using 1/2 inch wrench, remove eight nuts, washers,
ENGINE REPLACEMENT (2D ENGINE) (Sheet 6 of 18)
hose and elbow assembly (AD) from turbocharger
Tag air cleaner hoses as they are
removed for later installation.
18. Using procedure described in step 17, remove right
air cleaner hose and elbow assembly.
Cover all openings to prevent
entrance of foreign material to
prevent damage to engine.
Perform steps 19, 20, and 21 only if
you are replacing a 2D engine.
Remove left and right exhaust ejector
tubes (TM 9-2350-222-20-1-3) if
replacing 2DA engine.
19. Using 7/8 inch wrench, loosen connecting nut (AF)
and connecting nut (AG). Remove transmission vent
line (AH) from transmission.
Go on to Sheet 7
Change 2 3-23