TM 9-2350-222-20-2-3-2
36-77. AMMUNITION BOX INSTALLATION PROCEDURE
TOOLS: 7/16" combination wrench
7/16" socket (3/8" drive)
5" extension (3/8" drive)
Flat tip screwdriver
PERSONNEL: One
REFERENCES: TM 9-2350-222-10 for procedure to operate cupola caliber .50 machine gun
EQUIPMENT LOCATION INFORMATION:
FOLDOUT
CALLOUT
EQUIPMENT
Driver's Master Control Panel
11
EQUIPMENT CONDITION: Driver's master control panel MASTER BATTERY switch set to OFF
GENERAL INSTRUCTIONS:
Clear all ammunition and brass from cupola machine gun
and ammunition feed system (TM-10). Remove all live
ammunition from work area.
FRAME 1
Step
Procedure
1.
Place ammunition box (1) on mounting brackets (2).
Open doors (3).
2.
3.
Using screwdriver and wrench, attach ammunition box (1) to rear bracket (2) with two
screws (4), two flat washers (5), two lockwashers (6), and two nuts (7).
4.
Using screwdriver and wrench, attach bottom of ammunition box (1) to ammunition track
(8) with two screws (9), two lockwashers (10), and two nuts (11).
5.
Using socket and combination wrenches, attach side of ammunition box (1) to
(14).
GO TO FRAME 2
Para 36-77
36-170