BACKREST PAD INSTALLATION PROCEDURE (CONT)
I f backrest pad is d a m a g e d and replacement is
necessary, do the following steps. If pad is not damaged
and is serviceable, go to frame 2.
Using a dull knife or scraper, remove pad cushion material and adhesive cement from
surface of pad bracket (1).
Make sure work area is well ventilated while doing the
following step. Do not allow smoking in work area.
Bonding adhesives are toxic to personnel and are
Using a brush, apply a thin coat of adhesive to mating surface (1) of pad bracket (2)
and mating surface (3) of new pad (4).
Let the adhesive set until it becomes tacky, then press pad (4) in place on mating
surface (1) of pad bracket (2).
GO TO FRAME 2
Para 36-31 Cont