TM 9-2350-222-20-2-3-2
35-9.
M240 MACHINE GUN MOUNT ASSEMBLY PROCEDURE (CONT)
FRAME 2
PROCEDURE
STEP
1.
Using screwdriver, open end of ring (1) and put on small pin (2).
2.
Push rear pin (2) in rear mounting block (3) and secure with retaining clip (4).
3.
Using Allen wrench, attach retaining clip (4) to rear mounting block (3) with screw (5).
4.
Put front mounting block (6) on gun mount base (7).
Using 1-1/16 inch combination wrench, attach front mounting block (6) to gun mount base (7)
5.
with flat washer (8) and nut (9).
6.
Using screwdriver, open end of ring (10) and put on front pin (11).
7.
Using hammer and punch, put two spring pins (12) in front mounting block (6).
8.
Push front pin (11) in front mounting block (6) and secure with retaining clip (13).
9.
Using Allen wrench, attach retaining clip (13) to front mounting block (6) with screw (14).
GO TO FRAME 3
Para 35-9 Cont
35-36 Change 1