TM 9-2350-222-20-2-3-2
M219 MACHINE GUN MOUNT DISASSEMBLY PROCEDURE (CONT)
35-4.
Procedure
Step
1.
Using 3/8" Allen wrench, remove two screws (1) and two lockwashers (2). Remove
retainer (3) from bracket (4).
Using 3/4" combination wrench, remove two screws (5), two lockwashers (6). and two
2.
flat washers (7).
Remove bracket (4) from mount (8).
3.
NOTE
On some tanks, self-locking nut (9) and setscrew (11)
are one piece. Allen wrench-is not used.
4.
Using 1/2" combination wrench and 5/32" Allen wrench, remove four self-locking nuts
(9), four nuts (10), and four setscrews (1). Throw away self-locking nuts.
END OF TASK
Para 35-4 Cont
35-12