BREECHBLOCK RELEASE MECHANISM INSTALLATION PROCEDURE (CONT)
Lubricate shoulder face and cam of crank (1) (TM-10).
Put release mechanism (2) in breechring (3) so cam (4) fits in slot on inner face of breechring (3).
Using spanner wrench, turn cover (5) counterclockwise until three holes in cover (5) line up with three
holes in breechring (3), and flat edge of cover (5) is lined up with rear of breechring (3).
Using Allen wrench, attach cover (5) to breechring (3) with three new self- locking screws (6).
Follow-on Maintenance Action Required:
Install breechblock group (TM-l0).
Install loader's safety switch and guard (para 31- 1.3) (Late
END OF TASK
Para 32-6 Cont
Change 1 32-15