TM 9-2350-222-20-2-3-2
SLIDE REMOVAL PROCEDURE
31.1-8
9/16 in. open end wrench
TOOLS:
7/16 in. box end wrench
Cross tip screwdriver (Phillips)
3/16 in. socket head screw key (Allen wrench)
PERSONNEL: One
Remove loader's safety switch assembly and guard para 31.1-2
PRELIMINARY PROCEDURE
PROCEDURE
1.
Using screwdriver to hold screws (l), use 7/16 inch wrench and remove two nuts (2).
2.
Remove two screws (l), brace (3), two guides (4), and slide assembly (5) from plate (6).
3.
Using 9/16 inch wrench and Allen wrench, remove screw (7) and nut (8) from slide assembly (5).
END OF TASK
Para 31.1-8
31.1-10 Change 1