RETAINER AND LATCH INSTALLATION PROCEDURE
TOOLS: 7/16" socket (3/8" drive)
EQUIPMENT LOCATION INFORMATION :
Driver's Master Control Panel
Loader's Escape Hatch
EQUIPMENT CONDITION: Driver's master control panel MASTER BATTERY switch set to OFF
Put all shims (1) in place on hatch (2).
Using socket wrench, attach retainer and latch (3) and spring (4) to hatch (2) with two
Check operation of retainer and latch (3). If it does not operate properly, put in more
shims (1) or take out shims (1) as needed.
END OF TASK