TM 9-2350-222-20-2-3-2
24-16. SUPPORT TUBE REMOVAL PROCEDURE (CONT)
Step
Procedure
Traverse turret until support tube (1) can be reached from driver's compartment (TM-
1.
10).
Set turret traverse lock to LOCKED (TM-10).
2.
Using 1-1/8" socket wrench, remove two screws (2), and two flat washers (3) from
3.
upper support bracket.
NOTE
Step 4 is done from the driver's compartment.
4.
Using 3/4" socket wrench, remove two screws (4), two flat washers (5), two nuts (6).
5.
Remove support tube (1).
END OF TASK
Para 24-16 Cont
24-38