TM 9-2350-222-20-2-3-2
IR PERISCOPE SPARE HEAD STOWAGE BOX REMOVAL PROCEDURE
15-2.
TOOLS: Cross tip screwdriver (Phillips )
7/16" open end wrench
PERSONNEL: One
REFERENCES: TM 9-2350-222-10 for procedure to:
Traverse turret
Set traverse lock to LOCKED
EQUIPMENT LOCATION INFORMATION:
CALLOUT
FOLDOUT
EQUIPMENT
Driver 's Master Control Panel
11
Turret Traverse Lock
7
9
Periscope Stowage Box
EQUIPMENT CONDITION: Driver's master control panel MASTER BATTERY switch set to OFF
IR periscope spare head removed from stowage box
FRAME 1
Procedure
Step
Traverse turret until periscope stowage box (1) can be reached from driver's compartment
1.
(TM-10).
2.
Set turret traverse lock to LOCKED (TM-10).
3.
Open two latches (2) and open door (3).
4.
Using screwdriver and wrench, remove four screws (4). four Iockwashers (5), four flat
washers (6), and four nuts (7) that hold IR periscope spare head stowage box (8) on
periscope stowage box (1). Remove IR periscope spare head stowage box.
5.
Close door (3) of periscope stowage box (1).
END OF TASK
Para 15-2
15-2