TM 9-2350-222-20-1-5
G E N E R A L MAINTENANCE - Continued
Dowel Pin Installation
TOOLS: Ball peen hammer
SUPPLIES: Wooden block
Place pin (A) into hole (B), keeping pin (A) as
1.
straight as possible.
CAUTION
If pin (A) is tapped too hard, end
will flatten out and pin (A) will
not properly seat.
2.
Using hammer, lightly tap in pin (A) until
seated.
3.
If pin (A) cannot be driven by lightly tapping
with hammer, using wooden block (C), put
wooden block against pin (A) and hit with
hammer until pin (A) is seated.
TA140838