TM 9-2350-222-20-1-5
GENERAL MAINTENANCE - Continued
Removal of Studs Broken Above Surface
TOOLS:
Ball peen hammer
Screw extractor set
Hand oiler
1.
lube threaded area (A).
2.
Using hammer, lightly tap stud (B).
3.
Using hammer, tap stud remover (C).
4.
Using wrench, turn stud remover (C)
to the left.
5.
Using wrench, keep turning stud remover (C) to
the left until stud (B) is removed from threaded
hole (D).
6.
Using clean rag, wipe out threaded hole
(D) and surface (E).
TA140835