TM 9-2350-222-20-1-5
GENERAL MAINTENANCE - Continued
Removal of Studs Broken Below Surface
10. Using hammer, drive fluted extractor (F) into
stud (D).
11. Manually start nut (J) counterclockwise
onto extractor (F).
12. Using wrench, tighten nut (J) onto extractor
(F) by truning counterclockwise.
13. Using wrench, keep turning nut (J) counter-
clockwise until stud (D) is removed from
threaded hole (G).
14. Using clean rag, wipe out threaded hole (G) and
surface (H).
TA140834
C-16