TM 9-2350-222-20-1-5
G E N E R A L M A I N T E N A N C E - Continued
Removal of Studs Broken Below Surface
NOTE
A f t e r being drilled, studs broken
below surface may be removed
e i t h e r by using a spiral tapered
screw extractor or a fluted type.
If a spiral tapered screw extractor
is used, go to step 7. If a fluted
type extractor is used, go to step
10.
7.
Using tap wrench handle (E) with screw
extractor (F), turn tap wrench handle (E)
counterclockwise to screw extractor (F) into
stud (D).
Keep turning extractor counterclockwise
8.
until stud (D) is removed from threaded
hole (G).
9.
Using clean rag, wipe out threaded hole (G)
and surface (H).
TA140833
C-15