TM 9-2350-222-20-1-5
GENERAL MAINTENANCE - Continued
Inspection and Repair of Splines
TOOLS: Hand file
Hand oiler
1/4 in. paint brush
Rubber gloves
Protective wrapping (if required)
WARNING
Cleaning agent specified is flammable.
Use only in well
ventilated areas. Keep away from flames, sparks, or heat. Do
not smoke while using. Prevent contact with eyes, mouth,
and/or skin. Wear rubber gloves when performing cleaning
procedures.
1.
Wearing gloves, use dry cleaning solvent
spline (A). Make sure all traces of grease
and dirt are gone.
2.
Using clean rag, wipe spline (A) dry.
3.
Check spline (A) for signs of rust (B).
4.
rub rust (B) spline (A).
TA140823