Disconnect electrical connectors (A) from
Using 7/8 inch wrench, disconnect
elbow-to-solenoid hose (C) from 90-degree elbow
Using 3/4 inch wrench, disconnect output fuel
hose (E) from 45-degree elbow (F).
Using 7/16 inch wrench to hold screw and 7/16
inch socket on nut, remove nut and screw (G)
and remove ground wire (H) from bracket.
Using pliers, cut and remove lockwire (J).
Throw lockwire away.
Using 3/4 inch socket, remove two screws (K)
securing bracket (L) to engine.
Remove bracket (L) and attached solenoids (B)
with fittings as a unit.
Go on to Sheet 3