SMOKE GENERATOR INDICATOR LIGHT REPLACEMENT (Sheet 2 of 3)
Remove lens (C).
Remove preformed packing (D) from adapter
(E). Throw preformed packing away.
Using pliers, remove adapter (E).
Push in and turn lamp (F) to left. Remove
Using screwdriver, remove two screws (G) and
washers (H) securing base assembly (J) to
mounting bracket (K).
Remove base assembly (J).
CLEANING AND INSPECTION:
Clean lens (C) with moist, lint-free cloth (Item
Using steel wool (Item 55, Appendix D), remove any corrosion from connector terminals and lamp
socket of base assembly (J).
Inspect lens for cracks or deep scratches. Replace if any are found.
Go on to Sheet 3