GAS PARTICULATE FILTER REPLACEMENT (Sheet 3 of 3)
is equipped with
adapters, proceed to step 1. If not,
go to step 3.
Install adapters (A) onto each end of filter (B).
Using flat-tip screwdriver, install and tighten
clamps (C) to secure adapters (A) to filters (B).
Position filters (B) on mounting bracket so
that air flow arrows point toward hoses to
driver's position and slipring.
Install hoses (D), (E), (F), and (G) to filter
Slide clamps (H) up over hoses and adapters.
Using flat-tip screwdriver, tighten clamps (H)
to secure hoses (D), (E), (F), and (G) to
Install strap (J) over filters (B).
Using 7/16 inch socket and extension, install
two screws (K) to secure strap (J).
End of Task