TM 9-2350-222-20-1-5
GAS PARTICULATE FILTER REPLACEMENT (Sheet 2 of 3)
NOTE
It may be necessary to use 3/8
inch wrench to remove clamps (A).
REMOVAL:
1.
Using flat-tip screwdriver, loosen four clamps
(A) securing hoses (B), (C), (D), and (E) to filter
adapters (F).
2.
Remove hoses (B), (C), (D), and (E) from adapter
(F).
Using 7/16 inch socket and extension,
remove two screws (G) securing strap (H).
Remove strap (H).
Remove filters (J).
NOTE
Some vehicles may not have
adapters (L). If not, proceed
to INSTALLATION, PAGE
Using flat-tip screwdriver, loosen clamps (K)
and remove adapters (L) from filters (J).
Go on to Sheet 3