FIXED FIRE EXTINGUISHER MANIFOLD ASSEMBLY REPLACEMENT (LATE MODEL)
(Sheet 2 of 2)
Using 1-1/4 inch wrench to hold hose (A), use
1-3/8 inch wrench to disconnect nut (B) from
Lift out manifold assembly (C).
Position manifold assembly (C) in place.
Apply zinc chromate primer
to threads of hose (A) prior
Using 1-1/4 inch wrench and 1-3/8 inch
wrench, connect hose (A) to tube (B).
Use torque wrench and 1-1/4 inch crowfoot
tighten hose (A) to 40-55 lb-ft (54-75
Install 1st shot fire extinguisher cylinder
End of Task