CONTROL VALVE ASSEMBLY REPLACEMENT (Sheet 7 of 12)
Using adjustable wrench, install plug (C) into housing (D).
Install cable (E) through plug (C) and lay in slot in sheave (F). Extend cable full length of slot but
not past end of slot.
Prior to installing screws in step 3 below, coat threads of
Using 5/64 inch allen wrench, install screws (G) into sheave (F).
Place sheave (F) in housing (D) and wind sheave counterclockwise with cable (E) until arrow on
sheave is alined with SET arrow on housing.
Install safety pin (H) through handle (J) and cover (K).
Go on to Sheet 8