TM 9-2350-222-20-1-5
INTERIOR RELEASE MECHANISM REPAIR (Sheet 1 of 11)
PROCEDURE INDEX
PAGE
PROCEDURE
Disassembly
Cleaning and Inspection
Assembly
TOOLS: Slip joint pliers
5/16 in. combination box and open end wrench
Flat-tip screwdriver
Long round nose pliers (needle nose)
Ball peen hammer
3/32 in. drive punch
3/16 in. drive punch
Cross-tip screwdriver No. 2 tip (Phillips)
Vise
SUPPLIES: Lockwasher (MS35335-34) (2 required) Spring pin (MS16562-50)
Lockwasher (MS5333-71) (2 required) Spring pin (MS16562-48
Spring pin (MS16562-27)
Dry cleaning solvent (Item 54,
Spring pin (MS51923-246)
Cotter pin (112726)
Cleaning fluid (Item 35,
Water
Cooking stove
Rubber gloves
PRELIMINARY PROCEDURE:
NOTE
release
interior
Position
mechanism in vise as necessary to
and
disassembly
accomplish
assembly.
1.
Using wrench, remove two screws and
mechanism. Remove bracket (B), fuel shutoff
switch (C), and instruction plate (D) from
away.
TA140926