TM 9-2350-222-20-1-5
TACHOMETER REAR FLEXIBLE SHAFT REPLACEMENT (EARLY MODEL) (Sheet 2 of 7)
REMOVAL:
1.
Using 3/4 inch wrench, disconnect rear tachometer shaft (A) from adapter (B).
Using 1 inch wrench, remove packing nut (C) from bulkhead housing (D), and slide nut back onto
2.
tachometer shaft (E).
Using screwdriver, pry out bushing (F) and seal (G) from bulkhead housing (D).
3.
Remove packing nut (C), bushing (F), and seal (G) from tachometer shaft (E). Throw bushing and
4.
seal away.
Go on to Sheet 3
TA25387