TM 9-2350-222-20-1-5
TACHOMETER SHAFT BULKHEAD ADAPTER REPLACEMENT (LATE MODEL) (Sheet 2 of 2)
INSTALLATION:
1.
Remove nut (A) and lockwasher (B) from
adapter body (C) of adapter assembly.
Throw lockwasher away.
2.
insert adapter body (C) with rubber gasket (D)
into hole in bulkhead.
Install new lockwasher (B) and nut (A) onto
3.
adapter body (C).
4.
Using 1 inch wrench to hold adapter body (C),
use 15/ 16 inch wrench and tighten nut (A)
onto adapter body (C).
5.
Using 1 inch wrench, connect and tighten front flexible shaft assembly (E) onto adapter body (C).
6.
Using 15/16 inch wrench, connect and tighten rear flexible shaft assembly (F) onto adapter body (C).
7.
TA253873
End of Task