TM 9-2350-222-20-1-5
SPEEDOMETER FLEXIBLE SHAFT ASSEMBLY REPLACEMENT (Sheet 1 of 2)
TOOLS:
7/16 in. socket with 1/2 in. drive
5 in. extension with 1/2 in. drive
3/4 in. combination box and open end wrench
1 in. combination box and open end wrench
SUPPLIES:
Lockwasher (MS35333-40) (4 required)
REMOVAL:
1.
Using socket, remove four screws (A) and
2.
Using 3/4 inch wrench, remove end of flexible
shaft (D) from speedometer (E).
3.
Using 1 inch wrench, remove end of flexible shaft (D) from adapter assembly (F).
TA253857
Go on to Sheet 2