TM 9-2350-222-20-1-5
OUTER EXHAUST PIPE REPLACEMENT (Sheet 1 of 2)
TOOLS: 7/16 in. socket with 1/2 in. drive
7/16 in. combination box and open end wrench
9/16 in. socket with 1/2 in. drive
Hammer
SUPPLIES: Lockwasher (MS35338-44) (4 required)
Lockwasher (MS35335-35) (2 required)
1.
Using 7/16 inch socket, loosen two screws (A)
while holdimg nuts (B) with wrench. Remove
flat washers (D). Throw lockwashers away.
2.
Using 7/16 inch socket, loosen two screws (E)
while holding nuts (F) with wrench. Remove
washers (H). Throw lockwashers away.
3.
Remove two straps (J).
4.
Using 9/16 inch socket, loosen two screws (K)
securing two clamps (L). Remove two screws
(K) and lockwashers (M). Throw lockwashers
away.
5.
Remove exhaust pipe (N) from vehicle.
6.
Using hammer, tap two clamps (L) off pipe (N).
Go on to Sheet 2
TA141230