TM 9-2350-222-20-1-5
BILGE PUMP REPLACEMENT (Sheet 5 of 6)
Install clamp (M) on upper end of hose (N).
10.
11.
Slide hose (N) onto elbow (H).
12.
Using screwdriver, tighten clamp (M) on
hose (N) and elbow (H).
Position three new lockwashers (P) on
13.
three tank mounting pads (R).
Carefully position screen (Q) over lock-
14.
washers (P) on tank mounting pads (R).
15.
holes of screen (Q).
Carefully position bilge pump assembly (B) on
16.
screen (Q). Make sure holes in mounting plate
(S), screen (Q) and tank mounting pads (R) are
alined.
17.
Using 1/2 inch wrench, install three
through mounting plate (S), screen (Q), and
tank mounting pads (R).
Go on to Sheet 6
TA253849
19.1-6