TM 9-2350-222-20-1-5
HYDRAULIC SUCTION LINE SHUTOFF VALVE REPLACEMENT (Sheet 2 of 6)
REMOVAL:
1.
Using 11/16 inch wrench on drain cock body
(A), remove drain cock from reservoir.
2.
Using 7/16 inch wrench, remove two screws
and two washers (B) from spring clip (C) mount,
and remove spring clip (C) from reservoir.
NOTE
The following step requires two
people.
3.
With one person in turret using 3/4 inch socket
and extension, remove four screws and four
to adapter (F). Other person in driver's
compartment holds socket in place. Throw
4.
Remove suction line flanges (E).
5.
Pull suction line away from valve and cover
open end of suction line.
Go on to Sheet 3
TA141181