TM 9-2350-222-20-1-5
EMERGENCY LIFT CABLES REPLACEMENT (Sheet 2 of 3)
REMOVAL:
NOTE
Right and left cables are removed
1.
2.
3.
Using wrench, loosen nut (D).
4.
Using wrench, loosen nut (E) about five full
turns.
5.
Turn eyebolt (F) out of moldboard and remove
clamp (G) from moldboard and cable (C).
6.
Pull cable (C) through lifting handle (H) and
out of hole in moldboard rib (J), and remove
cable from moldboard.
Go on to Sheet 3
TA14110